Видео

Where can I find those unique wrenches from?

Just got my key stuck and the scissor hack worked,this hack was from 8 years ago and it still worked regardless ,thanks so much Now my dad won't have to get mad at me,LOL.

Музыка классно

Where i can get the carban brush

Hack maintenance. I guess if you are not ocd like me and don’t care about boring the whole more or scraping all the rest of surface around. Jesus man

What do you do when the bit spins the blind rivet? Grinder could roughly save you then. Another rivet removing video smartly suggests pin punching out the hardened pull rod before drilling. Hammer and chisel is desperate but ok if you don’t need to save the pieces

Lol the last resort is the first resort in our shop

Indonesia is the same

All I seen bolts not screw dumb ass

The scissors worked like a charm!! Thank you so much for sharing this video. 🙏🙏🙏🙏🙏

Find something sharp. Etch a line in the stub. Use a flathead. Thank me later.

I love how they take the crap from the filter, and put it down the sink so it clogs up instead! They forgot to unplug it during cleaning so the computer can reset itself! Duh!

Yeah I will need to use Method 5.

In a perfect world the key breaks flush with the key hole. In the awkward mine just a small part of the key broke and stayed deep in the key hole..

If a rivet is loose (so it'll just spin when you try to drill it), is the only option to hammer and chisel it? Anybody know any other options that are less likely to damage something?

Who calls them elastic pins anyway! And why wouldn't you hold the end you are working on in the vice instead of having the job sticking out and bouncing around like that!

Thank you for uploading this video. It worked like a charm, I used tweezers for a firm grip to pull the key out.

Will continue using one

Type J and N are better and simpler, it is compact, unnaked ground, compatible with Europlug C and also goes deep before having contact. With this dimension, you can have 3 type J and N plugs, instead of 1 type F.

I wish people would stop making tutorials vids without talking and instead annoying and distracting music. Lol Bain of my life

Excellent, works like charm

Song???

What about dissimilar sizes

Look there’s an easier way to do this. Reverse bits is what you need to get. RUclips on how to use those and you’ll be happy on how easy it is. I broke all the bolts on my manifold in my car because I was given the wrong torque. Well the reverse bits took them out so easy. Look it up.

Method 1-3: <insert They're The Same Picture Meme here>

Thank you so much for this method. I have been working on mobile equipment for years and have often struggled with the removal of outer bearing races. This could have saved me so much time and energy. I have used this method twice in two days, and it still seems counterintuitive, but thanks again

What do you do if the plastic handle snaps on the drain dial? Can’t open mine bcos it’s snapped

All of these tools work if you have enough elbow room. That's the problem. We don't enough elbow room down at the car.

I just use an old serpentine belt...just make a choke loop in the appropriate direction on the filter, cinch it up tight then continue to wrap the remaining loop in the same direction until al slack is rolled up the pit screwdriver in loops end and pry or just jerk it til loose then continue to pull while it unrolls....or make a loop of old bycicle chain then stick a Phillips head through both ends and pry

I was just swapping out old GTX 1050ti in my little brother's PC for a much bigger RTX 2080 recently. It does fits in his case, but there was a harddrive panel in the way. Armed with the knowledge I got from playing PC Building Sim 1&2, I get to work feeling confident. I underestimated the task at hand and I realized that PCBS didn't prepared me for these tiny fuckers, having to removed 4 of them to detaches the panel. Without proper tools and unwilling to use hammer and chisel because over concern about damaging components with the impacts, I spent about 10 hours removing them using flathead screwdriver to lift them as much as I can and pull each out in little pieces with a pair of wire cutting pliers. Was very disappointed that PCBS didn't prepared me to deal with this BS lol

You obviously never worked in aviation as a mechanic.

You forgot an option: Thermite

Thanks mate. Perfect video.

tucker . don't tell someone else to give up their home and freedom unless ypur willing to do the same! give, give give to a bully some time you meed to put on your big boy pants and be brave.

for the last method, have you ever heard about a tool called a drill?

Great video and nice soundtrack. As others also commented, some machines are easily accessable though a back panel, others (miele) open up on the front. Some machines have closed bottom, others are open as in this video, which is conveniant. Some motors have only 2 screws, some 4 (also 2 screws in the back, a little harder to access.) What surprises me however, is that the machine doesn't hang in an error. The AEG I saw not long ago had a motor equipped with a tacho sensor, so the machine knows the speed or lack thereoff. And still it filled up with water, stood still for a long time counting down the minutes...

I like to weld a nut on it, then I can use a socket.

It worked great for me! Thank you!

Bam nya di rebus dengan air..?

Support the job on a block of wood , that bounce is taking away at least 1/2of your force.

News flash...filters aren't typically mounted on a work bench. 😯

Thanks a lot man, learned something new today ❤

I thought it's not a good idea to turn the washing machine upside down because water could leak into the electronics which are on the top side?

Using these pull through rivets at work to bind a plastic cover to an aluminum base. Pain in the butt when it doesn't go all the way through with the gun and takes forever to try and pull it out or sand down without it being noticeable. Happened again right now and never thought about hammering it out, worked like a charm!

all of those are incorrect

The title should be "Correct and St*p*d Ways to Remove a Rivet"

That my friend, is a bolt!

😮

I will be doing the screwdriver method..So it can be empty..I will be buying the strap wrench..Only because I can’t tighten it up fully by hand..First time changing my oil..Thanks for sharing

My washing machine works except there is water leaking from the filter. The filter is clean though. What could it be?